During the cleaning process, the steel pipe outer wall shot blasting machine is controlled by electrical appliances. The speed-adjustable conveyor V-shaped roller table sends steel pipes, round bars, axles, round shafts and other products into the internal ejection zone of...
During the cleaning process, the steel pipe shot blasting machine is controlled by electrical appliances. The speed-adjustable conveying V-shaped roller table sends steel pipes, round bars, axles, round shafts and other products into the ejection zone of the cleaning machine...
Product Introduction During the cleaning process, the axle shot blasting machine is controlled by electrical appliances. The speed-adjustable conveying V-shaped roller table sends steel pipes, round bars, axles, round shafts and other products into the ejection zone of the...
Product Introduction Catenary + roller double conveyor system through type shot blasting machine . The workpiece of the pass-through shot blasting machine can be continuously run with the hoist chain, step-by-step, or use advanced accumulation push catenary to transport the...
Axle-through shot blasting machine Product Introduction During the cleaning process, the steel pipe through type shot blasting machine is controlled by electrical appliances. The speed-adjustable conveying V-shaped roller table sends the steel pipes, round bars, axles, round...
The industrial shot blasting machine is a kind of equipment that uses the shot blasting machine to install on-site after the construction is completed, and then clean the soil surface. At the same time, the castings of the building pavement can also be systematically cleaned....
The hook shot blasting machine is the standard model of the shot blasting machine. The diameter of the working cylinder is from 900 to 1300 mm, and the height is from 1300 to 3500 mm. The standard model has 2-7 blasting heads and the maximum load capacity is 10,000. The...
The working principle of stainless steel bag filter: The dust-containing gas enters the ash hopper through the air inlet or the filter bag chamber through the open flange. The dust-containing gas is filtered by the filter bag of the dust collector and enters the clean gas...
1. The working principle of cyclone bag filter: When the dust is drawn into the cyclone dust collector by the centrifugal fan, it will rotate from top to bottom along the wall. Therefore, the dust particles are separated from the airflow by centrifugal force, and then fall...
The jet pulse bag filter is an advanced high-efficiency bag dust removal equipment. It is a large-scale dust removal equipment with large air volume, good dust removal effect, high dust removal efficiency, reliable operation, convenient maintenance, and small footprint. The...
The gas purification method of the pulse bag filter is external filtration. The dust-containing gas enters the filter room of each unit through the draft tube. Because the bottom of the filter bag is designed with sufficient and reasonable vertical distance from the top of...
Advantages of pocket bag filters: .High dust removal efficiency, the dust concentration of the outlet gas of the dust collector is within tens of mg/m³, and it has a higher classification efficiency for fine dust with sub-micron particle size. .The range of processing air...
