Sep 20, 2020
How to distinguish the quality of shot blasting machine
1. Whether its appearance is exquisite and whether the paint spraying is meticulous.
2. Whether the guard plates, blades, impellers, directional sleeves, and pill wheels are processed carefully.
3. Whether the shot blasting effect and efficiency can reach the pre...
How to distinguish the quality of shot blasting machine
1. Whether its appearance is exquisite and whether the paint spraying is meticulous.
2. Whether the guard plates, blades, impellers, directional sleeves, and pill wheels are processed carefully.
3. Whether the shot blasting effect and efficiency can reach the expected effect.
4. Whether the service life of damaged parts can meet industry requirements.
Shot blasting machine installation skills
All shot blasting machines must comply with the following rules during the installation process:
1. The host is in place: the level and weight of the host must meet the requirements of the drawing when the host is in place.
2, sub-component installation should be carried out from bottom to top.
3, track type or catenary type, roller type should be from the inside to the outside of the equipment.
4. Part of the pre-test should be performed during the test run, and then fully run after normal.
What to pay attention to when operating the shot blasting machine
When operating the equipment, the operator must pay attention to whether the display of the electrical cabinet is normal.
1. All personnel entering the shot blasting room must wear goggles and safety helmets.
2. The operator must check the equipment every day.
Including: lubrication part and mechanical part.
Lubrication parts such as: reducer, hydraulic, lubricator and bearing chain.
Mechanical parts such as: wear of rotating parts, wear of vulnerable parts. Register the wear and tear every day, and replace the wearing parts in time.
Example: If the shot blasting machine vibrates, it must be stopped immediately to replace the blade.
3. The lubrication part should be filled with oil in time.
4. The directional sleeve must be adjusted and replaced in time.
5. Check whether the amount of steel shot is sufficient every day.
Use skills of shot blasting machine
1. During the shot blasting cleaning process, try to put more workpieces in the shooting area, which can improve the cleaning efficiency and reduce the wear of the guard plate and increase its service life.
2. When the workpiece cannot be increased, the directional sleeve should be adjusted so that the projected steel shot is projected on the workpiece as much as possible, which can also increase the life of the guard plate and reduce its wear.
3, ① The dust removal system should adjust the gates of the branch pipes to make the wind distribution reasonable and enhance the dust removal effect. ②The dust collector should ensure regular dust removal. )
Previous: How to install and replace the crawler of the crawler shot blasting machine
Next: What are the main uses of the horizontal shot blasting machine?
