Generally speaking, the collection port according to different working conditions and dust types are generally: the equipment comes with a dust removal excuse, suction arm, suction hood port, etc. The conveying part is generally selected according to the wind speed and...
The cyclone dust collector is the pre-processor of the dust collector. The cyclone series has a reasonable design, simple structure, and an axial entry type. The treated gas is improved by about 3 times that of ordinary cyclone dust removal, and the air flow is evenly...
Dust extraction system can be divided into two types: commercial type and household type from the perspective of use. From the operation, dust extraction system can be divided into two types: centralized management type and household management type. From the development of...
According to foreign experience, there are three different levels of dust removal equipment: the first choice is dust, that is, like various diseases, prevention is always more cost-effective than treatment, such as loading and unloading, adding a flow slot during belt...
Dust extraction system can be divided into two types: commercial type and household type from the perspective of use. From the operation, dust extraction system can be divided into two types: centralized management type and household management type. From the development of...
The working principle of the dust collection system: the PVC pipe network is used to connect the automatic interface designed on the floor or wall of the house to the working host installed outside the living area (such as the equipment room, basement or garage). When the...
The tightness of the lower part of cyclone dust separator is another important factor that affects the efficiency of dust removal. After the dust-containing gas enters the cyclone dust collector, it makes a helical rotation movement from top to bottom along the outer wall....
Baghouse dust collector can efficiently remove dry dust and smoke dust, the removal rate can reach 99%, and can be widely used in the dust collection of cement, power, metallurgy, chemical industry and other waste gas, such as cement mill, raw mill, mine crushing, materials...
Industrial dust collector is affected by the size of the dust particles. Generally speaking, under the same device and the same operating conditions, the performance of the dust collector is also significantly different due to the different dispersion of the dust particles....
According to foreign experience, there are three different levels of dust removal equipment: the first choice is dust, that is, like various diseases, prevention is always more cost-effective than treatment, such as loading and unloading, adding a flow slot during belt...
Cyclone dust collector is a type of dust collector. The dust-removing mechanism is to make the dust-containing airflow rotate, use the centrifugal force to separate the dust particles from the airflow and collect them on the wall, and then use the gravity to make the dust...
Cyclone dust collector is a type of dust collector. The dust-removing mechanism is to make the dust-containing airflow rotate, use the centrifugal force to separate the dust particles from the airflow and collect them on the wall, and then use the gravity to make the dust...
Sep 01, 2020
Aug 31, 2020
