Description
Blasting machine is firstly used to remove the sticky sand and scale on the surface of cast steel and cast iron in the foundry industry. Almost all steel castings, gray castings, ductile irons, ductile irons, etc. need to be shot blasted. This is not only to remove scales and sticky sand on the...
Share:
Blasting machine is firstly used to remove the sticky sand and scale on the surface of cast steel and cast iron in the foundry industry,indlucing H beam shot blasting machine,H beam shot blasting machine is used widely.
Almost all steel castings, gray castings, ductile irons, ductile irons, etc. need to be shot blasted. This is not only to remove scales and sticky sand on the surface of castings, but also an indispensable preparation process before casting quality inspection. For example, large gas turbine casings must undergo strict shot blasting before nondestructive testing to ensure the results of testing reliability. In general casting production, shot blasting of blasting machine is an indispensable process for discovering casting surface defects such as subcutaneous pores, slag holes, and sticky sand, cold insulation, peeling, etc. The surface cleaning of non-ferrous metal castings, such as aluminum alloys, copper alloys, etc., in addition to removing oxide scales and found surface defects of castings, the main purpose is to remove burrs from die castings and obtain decorative surface quality by shot peening To get a comprehensive effect. In metallurgical iron and steel production, shot peening or pickling is a process method to remove phosphorus scale mechanically or chemically to ensure high productivity in the mass production of steel. In the production of other alloy steel plates and belts such as silicon steel sheets and stainless steel sheets, it must be annealed and then shot blasted or pickled during the cold rolling process to ensure the surface roughness and thickness accuracy of the cold rolled steel plates.
Blasting machine characteristics
1 The rust removal speed is fast, and it can be done in a few seconds at the fastest.
2 The effect is good, and the rust can be basically eliminated.
3 The cost of rust removal is low, and you only need to buy abrasives after purchasing the equipment.
4 While removing rust, it can also eliminate burrs and debris on the surface, achieving a multi-purpose effect.
Qingdao Wozhou Machinery Manufacturing Co., Ltd. produces H beam shot blasting machine.
