Shop dust collector refers to the use of corresponding dust removal equipment to effectively solve the workshop environmental problems, giving workshop workers a warm and comfortable working environment, the purpose is to improve work efficiency, protect the environment, and...
That is, the inlet dust concentration is determined by the process of the dust point. When designing or selecting a bag-type dust collector, it is another important factor second only to the air volume. Expressed in g/m or g/Nm. For bag industrial dust collection system, the...
The powermatic dust collector is divided into the following three categories according to its principle of action (1) Filter type dust collector, including bag dust collector and particle layer dust collector, etc. (2) Electrostatic precipitator. (3) Magnetic dust collector....
When designing or selecting a bag-type the best dust collector according to the air volume, it is generally not possible to operate the dust collector in excess of the prescribed air volume. Otherwise, the filter bag is easily clogged, the life is shortened, the pressure loss...
The diameter and insertion depth of the exhaust pipe have a great influence on the dust removal efficiency of the diy cyclone dust collector. The diameter of the exhaust pipe must be selected to a suitable value. The diameter of the exhaust pipe is reduced, which can reduce...
There are many points to be aware of when using the dust catcher: Prevent the dust removal efficiency from decreasing It is necessary to prevent the gas from cooling below the dew point in the bag dust catcher during use, especially when using the bag dust catcher under...
The tightness of the lower part of cyclone dust separator is another important factor that affects the efficiency of dust removal. After the dust-containing gas enters the cyclone dust collector, it makes a helical rotation movement from top to bottom along the outer wall....
Dust extraction system can be divided into two types: commercial type and household type from the perspective of use. From the operation, dust extraction system can be divided into two types: centralized management type and household management type. From the development of...
Shot blaster was first used to remove the sticky sand and oxide scale of casting and forging parts. Mainly, the high-speed rotating impeller is used to throw the shot sand out and hit the surface of the part at high speed to meet the surface treatment requirements. The shot...
Industrial dust collector is affected by the size of the dust particles. Generally speaking, under the same device and the same operating conditions, the performance of the dust collector is also significantly different due to the different dispersion of the dust particles....
Blasting machine is firstly used to remove the sticky sand and scale on the surface of cast steel and cast iron in the foundry industry. Almost all steel castings, gray castings, ductile irons, ductile irons, etc. need to be shot blasted. This is not only to remove scales and...
Dust extraction is technical measures to remove particulate matter from dusty gases to reduce their emissions to the atmosphere. Dust-containing industrial waste gas may be generated from mechanical processes such as crushing, screening, transportation, and blasting of solid...
