The main points of building a sandblasting room

With the increasing demand for spraying, sandblasting room manufacturers have become the choice of many customers with spraying needs. Sandblasting rooms can not only increase coating adhesion, improve decoration, and enhance product corrosion resistance; it can also eliminate metal surface stress. , Thereby increasing the fatigue strength of the product. However, it is difficult to invest in the construction of a sandblasting room. The main points of the sandblasting room are:

1. The maximum size of the workpiece must be planned. If the blasting room is too small, it is not conducive to the operation of large workpieces. If the blasting room is too large, the investment in the corresponding dust removal equipment, recycling equipment, and civil engineering will increase, which will bring investment Unnecessary waste.

2. The output must be planned. The output is large and the tasks of the workers are full. It is necessary to build automatic recycling equipment for the whole room to improve efficiency; if the output is normal and the tasks are not balanced, the sandblasting machine manufacturer recommends partial automatic recycling plus manual auxiliary recycling. Way to save equipment and civil construction investment. After all, once a worker is hired, he cannot go to work if he has a task or take a break if he doesn't have a task. It should be normal to commute to and from work on time. After finishing the get off work in the morning, he will do the recycling work in the afternoon.

3. Due to process requirements, some products (such as non-ferrous metals) must be made of glass sand, white corundum, and quartz sand. We suggest that it is better to use mechanical recycling to build a sandblasting room. Due to the high hardness of the above abrasives, the pipes, especially curved The head part wears very fast. Although the use of honeycomb pneumatic recovery saves civil construction investment in the short term, there is also a lot of plugging and repair welding work in the later stage. Regarding the degree of wear, the sandblasting machine manufacturer tells you that you can compare the working life of steel grit, steel shot and glass sand, white corundum, and quartz sand through the sandblast nozzle and the sandblast tube. If steel grit or steel shot is used, we recommend the honeycomb pneumatic recovery method.