Brief introduction of the function of sandblasting room

Brief introduction of the function of sandblasting room

First, pre-treatment: electroplating, painting, spraying, etc. are covered by sandblasting before processing, the appearance is definitely hygienic, and together greatly improve the adhesion of the cover layer and the ability to prevent corrosion.

Second, finishing: castings, stamping parts, welding parts, heat treatment parts and other metal workpieces to remove scale, residue, dust; surface finishing of non-metallic products, the appearance of black spots on ceramic blanks and the removal of paint patterns, etc.

3. Innovation of old parts: Innovative cleaning of all moving parts such as automobiles, motorcycles, sandblasting room electromechanical equipment, etc. Together to eliminate fatigue stress, extend the service life.

4. Light decoration: all metal products and non-metal products (plastics, crystals, glass, etc.) are eliminated from the appearance traces, and the argon light mist surface treatment makes the appearance of the product promoted to a higher level.

V. Disposal of the tool: Argon light fog surface treatment of the mold surface, graphic production, and mold finishing, so as not to damage the mold surface and ensure the accuracy of the mold.

Sixth, burr disposal: the machined parts are removed with small burrs, and the plastic parts of the injection molded parts are eliminated.

VII. Rework of defective products: removal of bad masking layer of products, removal of bad appearance and printing.

8. Strengthening: Add the hardness of metal parts to eliminate stress, such as the appearance of aircraft blades, springs, machined tools and weapons.

Nine, anti-slip etching: metal products, non-metallic products, external etching pictures, text and anti-skid treatment, such as: marble, anti-skid handle, seal, stone lettering, etc.

Ten, denim clothing disposal: denim clothing matte, whitening and hair whisker effect.