Dec 30, 2020
Water sandblasting machine is also a kind of sandblasting machine. It is widely used in industrial life and has a good effect on sandblasting and cleaning of industrial equipment. However, it is inevitable that some failures will occur after using for a long time. Let's follow the editor to understand Problems that customers will encounter.
1. The crankcase temperature of the water sandblasting machine is too high:
The reason for this situation may be the wrong choice of lubricating oil, improper crankcase oil quantity and improper bearing fit. The solution is to choose the right lubricant, adjust the oil level to the right place, and adjust the bearing clearance.
2. Water in the crankcase of the water sandblasting machine:
The reason for this situation is that the seal is worn, and the solution is to replace the seal.
Water blasting machine problems should be detected and solved in time, don't ignore it, water blasting machine should also be maintained and maintained frequently, which can increase the service life of water blasting machine.
