Single hook shot blasting machine hooks are positioned, timing, and can adjust different workpieces. It has strong practicability and can process workpieces with different shapes.
The continuous shot blasting machine hangs the workpiece on the hook, and the suspension hook transports the workpiece in the predetermined direction (in the cleaning room). When the workpiece enters the cleaning room, the operator turns on the main switch of the system, and...
Cyclone dust collector is a type of dust collector. The dust-removing mechanism is to make the dust-containing airflow rotate, use the centrifugal force to separate the dust particles from the airflow and collect them on the wall, and then use the gravity to make the dust...
Pulse cartridge dust collector is mainly used in the following occasions: chemical industry, medicine, steel plant, power plant, carbon, abrasive, wood, smelting.
Shot blasting equipment is also the name of a mechanical surface treatment process, similar to sand blasting and shot blasting. The principle is to use the motor to drive the impeller body to rotate, and by the action of centrifugal force, the balls with a diameter of 0.2 to...
Manual feeding shot blasting machine is mainly used for heat treatment of various forgings or shot blasting of metal and other workpieces.
Steel crawler shot blasting machine is used to remove the sticky sand, rust layer, oxide scale and burr on the surface of castings.
Construction machinery shot blasting machine adopts electric hoist or self-propelled hoist for the traveling of the workpiece, and automatically enters the shot blasting room for shot blasting, and then cleans up.
Shot blaster was first used to remove the sticky sand and oxide scale of casting and forging parts. Mainly, the high-speed rotating impeller is used to throw the shot sand out and hit the surface of the part at high speed to meet the surface treatment requirements. The shot...
Shot blaster was first used to remove the sticky sand and oxide scale of casting and forging parts. Mainly, the high-speed rotating impeller is used to throw the shot sand out and hit the surface of the part at high speed to meet the surface treatment requirements. The shot...
That is, the inlet dust concentration is determined by the process of the dust point. When designing or selecting a bag-type dust collector, it is another important factor second only to the air volume. Expressed in g/m or g/Nm. For bag industrial dust collection system, the...
Shot blaster was first used to remove the sticky sand and oxide scale of casting and forging parts. Mainly, the high-speed rotating impeller is used to throw the shot sand out and hit the surface of the part at high speed to meet the surface treatment requirements. The shot...
