Reverse Pulse Cartridge Dust Collector for Welding/Grinding/Polishing

Pleated filter cartridge dust collector is mainly used in the following occasions: chemical industry, medicine, steel plant, power plant, carbon, abrasive, wood, smelting, mechanical processing, powder recycling, food processing, pharmaceutical production, food production, powder transportation, plasma Cutting, welding fume, casting and other industries.

Pleated filter cartridge dust collector system features 1. The filter cartridge uses imported polyester fiber as the filter material, a layer of sub-micron ultra-thin fibers is adhered to the general filter material, and the arrangement of the fibers on the adhesion layer is very tight, with very small sieve holes Can block most sub-micron dust particles on the surface of the filter material; 2. The use of filter pleats can increase the filtering area and make the dust collector structure more compact; 3. The height of the filter cartridge is small, and the workload of installation and maintenance is small; 4. Compared with the same volume dust collector, the filtering area is relatively large, the filtering air speed is small, and the resistance is not large; 5.Pleated filter cartridge dust collector adopts pulse spraying on-line dust removal method. The dust cleaning process is automatically controlled by the pulse controller, and the user can use the time control method to clean the dust as needed. Multiple filter cartridges are installed in the dust collector to increase its effective filtration area. When a certain (pair) filter cartridge meets the cleaning requirements, the blowing device is activated to clean the dust, and the other filter cartridges work normally. The cleaning effect does not affect the operation of the equipment, so that the dust collector can run continuously; 6. High dust removal efficiency (generally up to 99.6% or more), easy to operate;