Description
That is, the inlet dust concentration is determined by the process of the dust point. When designing or selecting a bag-type dust collector, it is another important factor second only to the air volume. Expressed in g/m or g/Nm. For bag industrial dust collection system, the dust concentration...
Share:
That is, dust collector machine for industry is determined by the process of the dust point. When designing or selecting a bag-type dust collector, dust collector machine for industry is another important factor second only to the air volume. Expressed in g/m or g/Nm.
For dust collector machine for industry the dust concentration at the inlet will directly affect the following factors:
⑴ Pressure loss and cleaning cycle. As the inlet concentration increases, the dust accumulation speed on the same filtering area is fast, and the pressure loss increases accordingly. As a result, the number of dust cleaning times has to be increased.
⑵Wear of filter bag and box body. In the case of dust with strong abrasiveness, the amount of wear can be considered to be proportional to the dust concentration.
⑶ Is it necessary to pre-collect dust? Pre-dust collection is to add a level of dust removal equipment in front of the dust collector entrance, also known as front-level dust removal.
⑷ Ash discharge capacity of the ash discharge device. The ash discharge capacity of the ash discharge device should be based on the ability to discharge all the collected dust. The amount of dust is equal to the inlet dust concentration times the treatment air volume.
⑸ Operation mode. The bag filter is divided into two operating modes: positive pressure and negative pressure. In order to reduce the wear of the fan, the positive pressure operation mode should not be used for the inlet with large concentration.
We provide dust collector machine for industry.
