Description
Wind cycle sandblasting room refers to the equipment that completes the recovery and separation of sand by aerodynamic action, and can truly achieve 100% repeated recycling and exchange of sand.
Share:
Wind cycle sandblasting room refers to the equipment that completes the recovery and separation of sand by aerodynamic action, and can really achieve 100% repeated recycling and exchange of sand.
1. The equipment failure rate is low, and maintenance work is significantly reduced.
Because the sandblasting room is equipped with a honeycomb sand-absorbing floor with a grid plate, there is no traditional machinery such as augers, belt conveyors, bucket elevators, etc., avoiding various types of mechanical wear in the process of collecting sand. Equipment maintenance is mainly based on regular replacement of the steel plate at the elbow of the air duct according to wear and tear. The equipment failure rate is low and the maintenance workload is small.
2. Reduce infrastructure costs
Due to the elimination of equipment such as bucket elevators, there is no need to dig deep pits, and the foundation depth is generally about 500mm, which saves a lot of capital construction costs.
3. Save a lot of investment in fixed assets
The wind cycle sandblasting room does not need auxiliary equipment such as sand pushing machine and sand suction machine, which saves a lot of investment in assets.
4. Completely improve the working environment
The wind cycle sandblasting room relies on the fan to provide power. Through the sand absorption floor, the sand and air of the entire room are sucked into the air pipe, and enter the sand and dust separator, forming the upper part of the air inlet and the floor suction in the room. The downward circulating air flow always suppresses the sand dust at the bottom of the chamber. The dust content in the air in the blasting room is very low, the visibility is high, the working environment is completely improved, and the workers' health is effectively protected.
5. High working efficiency
At the same time as the sandblasting operation, the sand is automatically recovered, which saves a lot of on-site sand cleaning time and shortens the operation time of a single segment.
