There are many points to be aware of when using the dust catcher: Prevent the dust removal efficiency from decreasing It is necessary to prevent the gas from cooling below the dew point in the bag dust catcher during use, especially when using the bag dust catcher under...
That is, the inlet dust concentration is determined by the process of the dust point. When designing or selecting a bag-type dust collector, it is another important factor second only to the air volume. Expressed in g/m or g/Nm. For bag industrial dust collection system, the...
Since its advent in the 1950s, the pulsed bag filter has been widely used at home and abroad, and has been continuously improved.
The tightness of the lower part of cyclone dust separator is another important factor that affects the efficiency of dust removal. After the dust-containing gas enters the cyclone dust collector, it makes a helical rotation movement from top to bottom along the outer wall....
The working principle of the dust collection system: the PVC pipe network is used to connect the automatic interface designed on the floor or wall of the house to the working host installed outside the living area (such as the equipment room, basement or garage). When the...
Dust-containing gas enters the filter bag through the flower plate hole, the dust is trapped on the inner surface of the filter bag, and the dust-containing gas is purified by the filter bag.
The Single filter cartridge filter is dedicated to the collection and treatment of floating and suspended dust with a large amount of dust.
The working principle of the dust collection system: the PVC pipe network is used to connect the automatic interface designed on the floor or wall of the house to the working host installed outside the living area (such as the equipment room, basement or garage). When the...
The cyclone dust extractor uses centrifugal force to remove dust. The greater the centrifugal force, the better the dust removal effect. In the circular motion (or curve motion), the centrifugal force on the dust is F=ma, where F--centrifugal force, N; m--dust mass, kg;...
Generally speaking, the collection port according to different working conditions and dust types are generally: the equipment comes with a dust removal excuse, suction arm, suction hood port, etc. The conveying part is generally selected according to the wind speed and...
Dust extraction system can be divided into two types: commercial type and household type from the perspective of use. From the operation, dust extraction system can be divided into two types: centralized management type and household management type. From the development of...
The tightness of the lower part of cyclone dust separator is another important factor that affects the efficiency of dust removal. After the dust-containing gas enters the cyclone dust collector, it makes a helical rotation movement from top to bottom along the outer wall....
Sep 01, 2020
Aug 31, 2020
