Uneven Curing Of Sand Mixer And Operation Process Of Resin Sand Treatment Equipment

      1. Is the ratio of resin and curing agent uniform?

      2. Whether the pipe joints of the curing agent pump or resin pump are leaking.

　　3. Whether the pressure of the air supply source meets the requirements (0.4-0.6MPa).

　　4. Whether the curing agent pump, resin pump, and liquid valve are worn out and need to be replaced.

　　 5. Too many impurities in resin or curing agent cause blockage of pump and pipeline.

　　 6. Check whether the sand mixer blades need to be replaced.

　　 7. As the temperature of the sand, the quality of the resin, the amount of curing agent added in the curing process, and the ambient temperature have a certain relationship, check whether the above conditions have changed.

What is the operation process of Qingdao Wozhou Machinery Resin Sand Treatment Equipment? Let us take a look at it together.

　　 The sand boxes and castings poured by Qingdao resin sand processing equipment are hoisted by the crane to the inertial vibration shakeout machine. After the sand is shaken out, the castings are transported to the shovel workshop, and the sand boxes are transported to the sand box warehouse for standby. After that, it is transported to a multifunctional vibrating crushing regenerator for crushing, de-filming and screening. After screening, the sand enters the bucket elevator and is lifted from the elevator to the centrifugal rotor secondary regenerator for powerful regeneration and fully de-filming. The reclaimed sand mixed with fine powder, dust and resin film flows into the flow curtain type winnowing machine through the flow sand tank, which is connected with a cyclone dust collector and a pulse-type back blow dust collector to remove fine powder and dust. The upper feed port of the mobile double-arm continuous resin sand mixer is connected with the sand outlet under the sand silo by a pneumatic gate. After pressing the sand mixing button of the electric control box of the sand mixer, the pneumatic gate opens automatically and the whole program is completed. .

　　 The above is the method to improve the production efficiency of resin sand equipment organized by Qingdao Wozhou Machinery for you. This is our conclusion based on years of experience. We hope to increase the profit of the foundry enterprise and reduce the production cost.

For the purchase of our company’s equipment, our company will assign specialized technical personnel to guide the installation and commissioning and train operators to be proficient in equipment operation and simple equipment maintenance and maintenance methods, and provide full tracking services, so we purchase our company’s sand processing equipment There are no worries.

　　 If you need to purchase or understand resin sand processing equipment, please contact us, professionally focus on providing our customers with high-quality and low-cost sand processing equipment.

　　 If you need more information about sand treatment, please inquire or come to Qingdao Wozhou Machinery Factory for inspection and negotiation!