Steel Pipe Cylinder Outer Wall Shot Blasting Machine, Steel Pipe Outer Wall Oxide Cleaning Plan

　　Using a spiral turntable roller conveyor mechanism, the steel pipe is spirally conveyed to the shot blasting area for shot blasting. Through the rotation of the steel pipe, a full shot blasting coverage is achieved. It reduces the collision and damage to the workpiece, and reduces the noise of the machine; The machine adopts Q034 cantilever centrifugal shot blasting device, which has the characteristics of long service life, simple structure and low failure rate; It adopts a winnowing separator, which has Good separation effect and high productivity have a positive effect on improving the life of blades; Bag-type dust collectors are used, and the dust emission concentration is lower than the national standard, which improves the working environment of workers;

       Outstanding advantages:

       The steel pipe outer wall shot blasting machine is suitable for the shot blasting of the steel pipe outer wall to remove the sticky sand, rust, oxide scale, dirt, etc. on the surface of the workpiece, so that the surface of the workpiece appears metallic, eliminates the internal stress of the workpiece, and improves the fatigue resistance of the workpiece. To achieve the purpose of improving the surface and internal quality of the workpiece, and ultimately to improve the corrosion resistance of mechanical products and metal profiles, improve the fatigue resistance of steel, extend its service life, optimize the surface process of steel, and achieve the purpose of complete cleaning.

　　 Fast cleaning efficiency:

　　 According to the diameter of the steel pipe, the cleaning speed can reach 1-8 meters per minute. It takes about 3-5 minutes to clean a tube.

　　 The cleaning effect is controllable:

　　 The pipe automatically rotates while advancing continuously, and there is no yin and yang surface and uneven cleaning.

      easy to use:

　　The worktable is automatically loaded and unloaded. A forklift or a gantry crane can solve the loading and unloading work of materials.

　　 Continuous work:

　　Using the PLC-controlled automatic loading and unloading device, one steel pipe is cleaned and another steel pipe is loaded at the same time, with no gap in between.

       working principle:

　　 Steel pipe shot blasting machine is suitable for continuous shot blasting of batches of steel pipes before welding or painting, to thoroughly remove rust, scale and other dirt. It is an expert in pipeline cleaning. After shot blasting, it can obtain a smooth surface with a certain roughness, increase spray adhesion, improve surface quality and anti-corrosion effect. Its excellent cleaning performance makes the labor-intensive methods of sandblasting and wire brushing obsolete. At the same time, the steel pipe shot blasting machine can minimize the production cost and greatly increase the output.　　

        The steel pipe shot blasting machine adopts a filter cartridge dust collector, a one-piece centrifugal throwing head can throw the abrasive in a controllable way and direction, and the shot is circulated. The size of the sealing ring can be adjusted to fit pipes of different diameters, and it is easy to replace. Different from other surface cleaning and pretreatment methods, the shot blasting process without chemical reaction process will not pollute the environment. The steel pipe shot blasting machine is simple to install, low in cost, small in space, and does not require pits or other discharge pipelines.