Small Parts Rust Removal Shot Blasting Machine, Small Parts Batch Rust Removal Cleaning Program

       After many small cast iron parts are only cast out of the mold, cleaning processes such as sand removal, scale removal, and surface strengthening are required. Basically, they are a large amount of cleaning work at one time. Therefore, the editor of Qingdao Wozhou Machinery cleans small parts in batches. It is recommended to use a crawler shot blasting machine.

　　Crawler shot blasting machine is a high-strength wear-resistant rubber track or manganese steel track to load workpieces. It uses a high-speed rotating impeller to throw projectiles onto the workpiece in the chamber to achieve the purpose of cleaning. It is suitable for sand removal, rust removal, scale removal and surface strengthening of small castings, forgings, stamping parts, gears, springs, etc. It is especially suitable for cleaning and strengthening parts that are not afraid of collisions.

　   1. Small cast iron parts can be cleaned in large quantities at one time, saving time and labor and labor costs.

　　2, directly put the small cast iron parts into the upper hopper of the machine, and automatically put them into the shot blasting room after pressing the button.

　　3. The equipment is equipped with an automatic separator, which can separate the cleaned sand, oxide scale and other materials into the waste pipe and discharge it. The steel shot will also be separated and used for recycling, so there is no need to worry about the waste of steel shot.

　　4. The dust generated during the shot blasting process of the machine will be automatically sucked into the dust collector, so it will not cause environmental pollution, and it also meets the relevant national environmental protection regulations.

　　5. The shot blasting process can not only clean sand, remove oxide scale, strengthen the surface, but also polish small parts of cast iron.

　　6. The shot blasting process will not damage the metal body of small cast iron parts and strengthen the hardness of the metal surface.