Keep The Road Shot Blasting Machine Clean And Avoid Small Accidents Caused By Small Dust

Keep the road shot blasting machine clean and avoid small accidents caused by small dust

Shot blast machine cleaning room protective cover: The rolled Mn13 protective cover has good wear resistance, can resist strong impact wear and large shot blast stress wear. The greater the external impact force of the shot blasting machine, the higher the surface wear resistance and the greater the impact or contact.

The surface of the high-manganese steel will harden under the action of stress, and the surface hardness will rapidly increase from hb200 to above hb500 to form a highly wear-resistant surface, while the internal austenite maintains good impact toughness. As the surface hardened layer wears out, a new work hardened layer will continue to form and will not crack during use. The service life can reach more than 8 years.

The blade of the shot blasting machine adopts a simple directional solidification casting process and an improved heat treatment process, so that the carbides are arranged perpendicular to the grinding surface, reducing the volume of residual austenite, eliminating shrinkage defects, increasing density, and reaching the service life. Over 1000 hours. Shot blasting machine positioning sleeve: fully enclosed dial, which can easily adjust the shot blasting angle and direction. It is made of high-chromium special wear-resistant cast iron. Each batch of parts undergoes appearance and material inspection.

The price of different types of shot blasting machines must be different. The shot blasting machine has many parts. Dust removal pipes are also places we need to pay attention to. Check the shot blasting machine for leaks, dust or damage.

At the same time, please pay attention to the dust on the filter screen. Make sure the shot blasting machine is clean and avoid small accidents caused by small dust. It is normal to use the buttons on the console frequently. We must regularly update all the motors and bearings on the new shot blasting and lubrication equipment; we should regularly check whether the bolts on the shot blasting machine are loose and whether it is necessary to replace worn parts after scrapping.

The shot blasting machine in the shot blasting machine is mainly composed of four blades, a guard plate, a directional sleeve and a pair of wheels. The protective plate has a top protective plate, a side protective plate and an end. These three shields. The two parts of the sand blasting machine and the shot blasting machine are used together for metal surface treatment, especially for removing and removing scale on the metal surface.