How To Shot Blasting Equipment Evenly And How To Choose Good Quality

How to shot blasting equipment evenly and how to choose good quality

Shot blasting equipment, although only four words, contains a lot of knowledge, so for all of us, we need to master all relevant knowledge before we can know how to use shot blasting equipment correctly and reasonably. Make full use of products and avoid waste.

1. What do you need to do if you want to choose a high-quality nitrogen generator?

If you want to choose a good quality nitrogen production equipment, you need to do the following: First, understand the use requirements clearly, determine the product price range that you can afford, and further narrow the choice; Second, choose professional and formal manufacturers In this way, the quality of the product and the performance of the product can be guaranteed, and then the effect of the product can be guaranteed.

2. What should I know about the daily maintenance of shot blasting equipment?

The instructions for daily maintenance of shot blasting equipment are as follows:

(1) Before the device is used, a comprehensive and careful inspection should be carried out to check whether its components can work normally and whether there is a fault problem, and whether the device has hidden safety risks.

(2) Always check the wearing parts in the shot blasting equipment, mainly to see whether it is seriously worn and whether to replace new parts.

(3) The operation personnel should strictly follow the equipment operation rules and safety operation rules to perform standard operations, and illegal operations are strictly prohibited.

(4) The chamber guards and seals in the shot blasting equipment should be inspected daily, and if damaged, they should be replaced with new ones in time.

3. How to achieve uniform shot blasting equipment?

Shot blasting equipment wants to achieve uniform shot blasting. In addition to correct and standard shot blasting operations, for large workpieces, the roller should be sanded first, the riser of the casting should be cut off and placed in the roller to roll the workpiece Most of the sand on the surface is cleared first and then shot blasted to achieve the goal.

4. What is the difference between the shot blasting process and the sand blasting process?

From the professional point of view, the shot blasting process of the shot blasting equipment is to drive the projectile with sufficient speed to achieve the purpose of surface treatment, and the sand blasting process is driven by compressed air. The angular sand has sufficient speed to achieve the purpose of surface treatment. Therefore, they are different in carrier and driving mode, and there are obvious differences.