Automobile Rear Axle Whole Axle Drive Shaft Shot Blasting Machine, Strengthened Rust Removal And Cleaning Plan For Automobile Rear Axle

       With the continuous development of China's road transportation and the development of the automobile industry, the quality requirements of various automobile parts are continuously improved. The original use of roller or catenary shot blasting machines and sandblasting equipment to clean the axles is no longer sufficient. Productivity and surface cleaning quality requirements (previously, two types of equipment were required to clean the inner and outer surfaces of the axle). It has become inevitable to develop an advanced equipment that can be used to clean and strengthen the inner and outer surfaces of the entire rear axle at once. Through many tests and improvements, the entire rear axle bridge shot blasting and strengthening equipment has been successfully developed. The shot blasting machine throws (sprays) countless high-speed moving projectile streams onto the inner and outer surfaces of the axle to clean up the oxides and surface appendages on the inner and outer surfaces of the entire rear axle. It effectively deforms the surface through rational deformation. Improve the strength and surface corrosion resistance of the rear axle.

　　 With the continuous increase of the total number of automobiles in my country and the continuous growth of the automobile transportation industry, the requirements for strengthening the shot blasting machine for auto parts are also increasing. Therefore, Qingdao Wozhou Machinery has proposed a shot blasting strengthening plan for the automobile rear axle.

Shot blasting strengthening plan for automobile rear axle:

　　Automobile rear axle shot blasting machine has a good effect on cleaning the inner and outer surface of automobile rear axle. It is mainly used to clean the dioxide on the inner and outer surfaces of the automobile rear axle and the entire bridge, and the surface appendages and rear axle strengthening. The automobile rear axle shot blasting machine mainly includes shot blasting cleaning room, side door, separator, screw conveyor, elevator, shot blasting assembly, shot blasting system, workpiece rotation device, blasting system, dust removal and air control device, Electric control devices, etc.

      The working process of the automobile rear axle shot blasting machine is similar to that of the ordinary model shot blasting machine. When the equipment starts to work, the door of the chamber body is opened. In the feeding area, the rear axle of the automobile is placed on the feeding trolley and the trolley table is The axle is lifted, and then the loading trolley automatically sends the axle to the clamping mechanism in the cleaning room. The cylinders of the clamping mechanism on both sides of the chamber push the tapered jaws to move to the middle at the same time, and the axle is firmly clamped.

      Then the loading trolley table is lowered to exit the cleaning room, the door of the chamber body is closed, the clamping rotation mechanism rotates with the axle under the drive of the reducer, and the shot blasting device is opened and the shot blasting tank is opened to clean the inner and outer surfaces of the axle at the same time; After cleaning, the autobiography mechanism stops, the door of the chamber body is opened, the unloading trolley enters the designated position of the chamber body, the cylinder of the clamping mechanism pushes the tapered jaws to move to both sides, and the axle is placed on the unloading trolley to take out the chamber body and discharge the material , The loading trolley repeats the above actions for the next working cycle.

　　The rear axle shot blasting machine produced by Qingdao Wozhou Machinery, under the premise of ensuring the quality, gives customers a satisfactory price/performance ratio, contact our company for more details about the rear axle shot blasting machine.