Apr 20, 2021
The clasp type shot blasting machine is divided into single clasp and double clasp. The hook type shot blasting machine uses two hooks to load workpieces into the shot blasting room alternately. Use the shot blasting machine to throw 0.1~1.5mm projectiles to the surface of the workpiece to make the surface of the workpiece reach a certain roughness, make the workpiece beautiful, or change the compressive stress of the workpiece to increase the life. This model is widely used in the surface cleaning or strengthening treatment of small and medium-sized castings and forgings in the industries of gears, gear shafts, forging, casting, construction, chemicals, motors, machine tools, etc. . And this model is suitable for cleaning slender and thin-walled parts that are not suitable for collision. The hook type shot blasting machine is the standard model of the shot blasting machine. The rotating diameter of the shot blasting chamber is from 1000 to 3000 mm, and the height is from 1200 to 3000 mm. The standard model has 2-7 blasting heads, and the load capacity is up to 10,000 kg. The production efficiency of this shot blasting machine is quite high, and the flexibility span is also quite large. It is an ideal cleaning and strengthening equipment, and it is easy to operate. You only need to load the workpiece to be processed on the machine, press the start button, and go through a very In a short time (usually 5-7 minutes), the entire cleaning process is completed and all dust and residual shots are removed. It is mainly suitable for the surface treatment of various medium and large castings, forgings, weldments, and heat-treated parts, including Fragile and irregularly shaped workpieces.
