Working principle of non-standard customized single turntable shot blasting machine

The rotary table shot blasting machine uses the rotary table as the workpiece carrying device, which can be divided into φ1200 mm, φ1600 mm, φ1800 mm, φ2500 mm, etc. according to the diameter of the turntable. Some of this type of cleaning machines are equipped with one shot blasting device, and some are equipped with two or more shot blasting devices, and some work continuously, and some work intermittently, depending on their own needs.

Its working principle is: place the workpiece on the turntable (there is a distance between the workpieces, no contact, no collision), the turntable takes the workpiece into the ejection area for shot blasting, and when it turns to the position of the workpiece, the workpiece can be removed . Therefore, this type is most suitable for a workpiece that does not need to be cleaned on one side, otherwise the workpiece should be turned over and cleaned again. However, this turntable hook shot blasting machine of Meflex has a hook in addition to the turntable, and the hook has a rotating function. Therefore, it is suitable for surface treatment of all kinds of workpieces with high requirements. During the shot blasting operation, the shot blasted steel shots fall to the plane of the turntable and the bottom of the shot blasting chamber. The shots on the plane of the turntable are pushed by the scraper mechanism installed at the lower part of the turntable, and the shots are sent to the bottom spiral, which is pushed The conveyor is transported to the bottom of the hoist, and then the steel shot is lifted to the top sorter by the hoist belt assembly. The sorter is powered by the dust collector to screen the recovered steel shot.

The purpose is to separate the broken steel shot and dust in the shot blasting process. Through the sorter, the qualified steel shot will directly enter the storage bin above the shot blasting device, ready to be reused. The broken steel shots will be separated and fall into the waste barrel through the bypass sand pipe.