Apr 10, 2021
During the shot blasting operation of the hang type shot blasting machine, the steel shot projected by the shot blasting device falls to the bottom of the shot blasting chamber, and is conveyed to the bottom of the elevator by the screw pusher, and then the steel shot is lifted to the bottom by the elevator belt assembly. In the sorter on the top, the recovered steel shots are screened.
The purpose is to separate the broken steel shot and dust in the shot blasting process. Through the sorter, the qualified steel shot will directly enter the storage bin above the shot blasting device, ready to be reused. The broken steel pellets will be separated and fall into the waste bin through the bypass sand pipe; the dust will be sucked into the wet dust collector, wrapped by high-speed water droplets at the venturi, and then sprinkled on the inner wall of the box, turning into mud and then sinking At the bottom of the dust collecting tank, the mud scraping system removes the mud from the waste hopper outside of the machine for regular cleaning. This model is widely used in the surface cleaning or strengthening treatment of medium and small castings and forgings in gears, gear shafts, forging, casting, construction, chemicals, motors, machine tools and other industries, such as descaling, burrs, sand castings, etc. . And this model is suitable for cleaning slender and thin-walled parts that are not suitable for collision.
The hook type shot blasting machine is the standard model of the shot blasting machine. The rotating diameter of the shot blasting chamber is from 1000 to 3000 mm, and the height is from 1200 to 3000 mm. The standard model has 2-7 blasting heads, and the load capacity is up to 10,000 kg. The production efficiency of this shot blasting machine is quite high, and the flexibility span is also quite large. It is an ideal cleaning and strengthening equipment, and it is easy to operate. You only need to load the workpiece to be processed on the machine, press the start button, and go through a very In a short time (usually 5-7 minutes), the entire cleaning process is completed and all dust and residual shots are removed. It is mainly suitable for the surface treatment of various medium and large castings, forgings, weldments, and heat-treated parts, including Fragile and irregularly shaped workpieces.
Previous: Working principle of professional hook shot blasting machine for precision castings
Next: Working principle of rubber track shot blasting machine
