Application scope and characteristics of the composition system of dry and wet sandblasting room

Features of dry and wet sandblasting room: 1. Environmentally friendly pneumatic recycling sandblasting room, no need for deep pits (or not for pits), low infrastructure costs, and short construction period; 2. Equipped with abrasive separation and sorting device, the abrasive is automatically recycled and recovered, which improves the utilization rate and the efficiency of sandblasting;

3. Abrasive recycling separation and separation and dust removal share a fan, one wind is used for multiple purposes, which saves 30% of energy compared with the traditional sandblasting room;

4. In the sandblasting system, one can work with multiple high-speed spray guns, and each spray gun can be individually controlled, the sandblasting cleaning efficiency is high, and the working pressure can be steplessly adjusted.

5. The dry and wet blasting room can use materials of different materials and different particle sizes at the same time to meet different process requirements.

6. The air flow in the sandblasting room circulates from top to bottom, with bright and comfortable light and high visibility.

7. Adopting internationally advanced filter-type dust removal technology, the dust emission of the sandblasting room is far below the national environmental protection requirements.

8. The dry and wet sandblasting room body is composed of polystyrene foamed plastic sandwich color board room, which has the function of silencing, beautiful, strong and airtight.

Component system of dry and wet sandblasting room:

1.     Sandblasting room body

2. Lighting system

3. Mechanical recycling system --- honeycomb floor module

4. Sandblasting sorting and purification system

5. Sandblasting system

6. Ventilation and dust removal system

7. Workpiece conveying system

8. Operation control electrical system

Application scope of dry and wet sandblasting room:

The wet and dry sandblasting room is suitable for pretreatment of small and medium-sized houses, such as: rough parts, casting parts, welded parts, heat-treated parts, steel structures, containers, transformer shells, special-shaped parts, etc.